Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sinamics S120 suppress alarm 206200, 230002

Created by: Taskforce at: 6/13/2012 3:41 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

6/13/2012 3:41 AM	Rate (0)
Taskforce Member Joined: 12/12/2011 Last visit: 4/22/2016 Posts: 2 Rating: (0)	Dear. experts. I have two problem in field. 1. We use sinamics S120 booksize module for CNC machine. We face to alarm 206200 even thought machine is not running. So we measure input 3 phase voltage but we couldn't find outany problem for input line. And Change every module for drive, Filter, AIM, ALM, MoMo but same alarm occured. Any method suppress this alarm? we guess input voltagedon't have any problem. The other machine made by using SIMODRIVE 611D but it don'thave any problem These two machine use same input line. 2.Sinamics S120occure alarm 230002but we don't have any problem for DC link. So any methodforincrease DC link voltage motoring value? Thank youl

Suggestion To thank Quote Answer

6/13/2012 8:04 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/20/2024 Posts: 22482 Rating: (3039)	Hi, 1.) you say that S120 and 611D on the same power line. have you a filter for each system or only one filter for both? Regards Christoph

Suggestion To thank Quote Answer

6/13/2012 9:36 AM	Rate (0)
Taskforce Member Joined: 12/12/2011 Last visit: 4/22/2016 Posts: 2 Rating: (0)	Thanks to your answer. Two machine use each filter, they didn't share filters.

Suggestion To thank Quote Answer

5/27/2014 2:35 PM	Rate (0)
AWAIS ASIF Posts: 3 Rating: (0)	Hi I have a problem in my Siemens 802d 1. We use sinamics booksize module for CNC machine. We face to alarm 230002 (Axis C1 powerunit dc link over voltage) during machine running. So we measure input 3 phase voltage but we couldn't find out any problem for input line. Any method suppress this alarm? we guess input voltage don't have any problem. The other machine made by using Siemens 840D but it don't have any problem These two machine use same input line. plz help for any solution
AWAIS ASIF Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on