Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sinamics V20 with PLC Delta + MODBUS RTU

Created by: Natali at: 11/16/2015 12:56 PM (3 Replies)

Rating (2)

Thanks 2

4 Entries

11/16/2015 12:56 PM	Rate (0)
Natali Posts: 21 Rating: (2)	Hello, I'm trying to communicate the SINAMICS v20 with a PLC Delta, but I'm not getting. I wonder what the parameter I have to have to start the engine, to test the communication using MODBUS RTU. tks.
Natali Posts: 21 Rating: (2)	Last edited by: Natali at: 11/16/2015 1:30:57 PM
Suggestion To thank Quote Answer

11/16/2015 1:33 PM	Rate (1)
William_B Posts: 5225 Rating: (1197)	The following link might be of some help: https://support.industry.siemens.com/cs/ww/en/view/63696870
William_B Posts: 5225 Rating: (1197)
Suggestion To thank Quote Answer

11/16/2015 5:24 PM	Rate (0)
Natali Posts: 21 Rating: (2)	Hi, William_B Unfortunately I do not own the TIA Portal. tks
Natali Posts: 21 Rating: (2)
Suggestion To thank Quote Answer

11/16/2015 5:43 PM	Rate (1)
William_B Posts: 5225 Rating: (1197)	Natali Hi, William_B Unfortunately I do not own the TIA Portal. tks Look at the PDF documentation. There is plenty information in the documentation on how the V20 is connected and what should be set on the drive. Even the description on what action the PLC should do, may be helpful. Also.. come in contact with the Delta guys to tell you more of their side of the equation. w
William_B Posts: 5225 Rating: (1197)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users dchartier Natali

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_V

Follow us on