Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SINAMICS V90 PN failed to connect with V-ASSISTANT throug Ethernet

Created by: Snitsig20 at: 10/30/2022 9:56 AM (5 Replies)

Rating (0)

Thanks 2

6 Entries

10/30/2022 9:56 AM	Rate (0)
Snitsig20 Member Joined: 1/23/2018 Last visit: 6/3/2024 Posts: 4 Rating: (0)	Dear, When I started up V-ASSISTANT the first time, I could make a connection through Ethernet with the Sinamics V90 PN (6SL3210-5FB10-4UF1). After installation of some other software (PLCnext Engineer from Phoenix Contact) this connection did not work anymore. I get the message 'Failed to search Ethernet Interface'. The USB connection is still working. When I reinstalled V-ASSISTANT I got the following message: 'A newer version of WinPcap (...) is already installed...'. I just continued with the installation, but no success. Has anyone a solution for this. Thanks, Rudy Attachment Knipsel.JPG (834 Downloads)

Suggestion To thank Quote Answer

11/1/2022 5:21 AM	Rate (0)
Jack0004 Advanced Member Joined: 12/16/2021 Last visit: 8/22/2023 Posts: 126 Rating: (2)	Hi Snitsig20, Which version of V-ASSISTANT Software have you installed. Regards Snitsig20. Dear, When I started up V-ASSISTANT the first time, I could make a connection through Ethernet with the Sinamics V90 PN (6SL3210-5FB10-4UF1). After installation of some other software (PLCnext Engineer from Phoenix Contact) this connection did not work anymore. I get the message 'Failed to search Ethernet Interface'. The USB connection is still working. When I reinstalled V-ASSISTANT I got the following message: 'A newer version of WinPcap (...) is already installed...'. I just continued with the installation, but no success. Has anyone a solution for this. Thanks, Rudy
	If The Information Helpful, Then Don't Forget Give (To thank ) and Rate It
Suggestion To thank Quote Answer

11/11/2022 11:36 AM	Rate (0)
Diego16 Member Joined: 12/22/2021 Last visit: 2/12/2024 Posts: 1 Rating: (0)	I have the same problem, VAssistant Version 1.07.02, usb is ok but with ethernet I have always this message : "failed to search ethernet interface"

Suggestion To thank Quote Answer

11/13/2022 7:31 AM	Rate (0)
Snitsig20 Member Joined: 1/23/2018 Last visit: 6/3/2024 Posts: 4 Rating: (0)	Thanks for the reply. I am using Version 1.08.00.

Suggestion To thank Quote Answer

11/30/2022 10:20 AM	Rate (0)
Technology Team Platinum Expert Joined: 10/11/2006 Last visit: 1/22/2025 Posts: 5985 Rating: (824)	Dear Snitsig20, Please ensure, that the V90PN has the latest FW. https://support.industry.siemens.com/cs/ww/en/view/109746210 If this doesn't help, please open a SR at the customer support.
	With best regards, Technology Team Application consulting and pre sales support for SINAMICS, SIMATIC Technology, SIMOTION, SIMOTICS and MOTION CONNECT
Suggestion To thank Quote Answer

1/15/2025 7:51 AM	Rate (0)
a.select Regular Member Joined: 2/11/2015 Last visit: 1/21/2025 Posts: 3 Rating: (0)	Hi, Although the topic title is old, I just encountered this problem. Probably the problem is caused by windows updates. Solution: Uninstall Wincap/WinPcap or Npcap and install the latest version. The problem will be fixed.

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Moderator_Lan 0_Einstein

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_V

Follow us on