Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sinumerik 810D PCIN Problem

Created by: Will8921 at: 10/18/2011 9:46 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

10/18/2011 9:46 PM	Rate (0)
Will8921 Posts: 1 Rating: (0)	Does anyone know where I can get the manual for uploading nck and plc files? We managed to reset the PLC but when we try to load the original plc and nck files, the transfer will stop half way then output an error. The error is "RS232C transmission error has occur -> see Error Log". In the error log, it only outputs "Error DATA". I have check the setting both from the machine and pc, and nothing seem wrong. It is a Sinumerik 810D MMC 100.2 Thank you for reading
Will8921 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

10/19/2011 5:59 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello..... Does your baudrate what you have kept is proper ??? may be the file what your loading is wrong... Check this link regarding data loading /tf/WW/en/Posts/54277 Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on