Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sinumerik 810d

Created by: alessandro.capasso at: 10/18/2011 9:07 AM (11 Replies)

Rating (0)

Thanks 1

Result pages:: |; 1 | 2; |

12 Entries

Entries per page: 10 | all

10/18/2011 9:07 AM	Rate (0)
alessandro.capasso Posts: 7 Rating: (0)	Hallo sir we have a Maximart mc 1050 with: sinumerik 810D to transfer file we use: PCIN version 4.2 after some problem we rebooted the arc and nck file, we configurate all the parameter but we still have a couple of problem. -before we rebooted we could work with 5 different origin, but now we can use just one -we work on shopmill and we save the program on pc by the pcin, when we recall program we lost all the profile and the allarm is E_CON/program..../missing or with error. could you please suggest us what can we do? thank you for reply
alessandro.capasso Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

10/18/2011 9:51 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	alessandro.capasso Hallo sir we have a Maximart mc 1050 with: sinumerik 810D to transfer file we use: PCIN version 4.2 after some problem we rebooted the arc and nck file, we configurate all the parameter but we still have a couple of problem. -before we rebooted we could work with 5 different origin, but now we can use just one -we work on shopmill and we save the program on pc by the pcin, when we recall program we lost all the profile and the allarm is E_CON/program..../missing or with error. could you please suggest us what can we do? thank you for reply Hello.... Could you provide me the error detials which is displayed in the screen ??? Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

10/18/2011 10:00 AM	Rate (0)
alessandro.capasso Posts: 7 Rating: (0)	the allarm who appear after we download the program is: 112504 file does not exist or defected (translated from italian to english) programname_MPF MMC
alessandro.capasso Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

10/18/2011 11:01 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello.... Problem looks like one of your program what you have loaded to the control doesn't exists.... but you can move the axis....right.... Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

10/18/2011 11:14 AM	Rate (0)
alessandro.capasso Posts: 7 Rating: (0)	yes we can work with the machine the problem is that we create a program called "test" with the profile (sub program), after we finished we upload this program on pc with pcin. we delete the program/subprogram "test" on machine we transfer "test" from pc to machine and the allarm appeare. if we DON' T delete the subprogram test on machine, and we transfer from pc to machine, the program works it' s like when we transfer from the machine to pc, the subprogram are not transfered
alessandro.capasso Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

10/18/2011 2:29 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello..... Does your 810D is equipped with PCU20 / PCU50 ?? After loading the test.spf program if you want to execute you need make Alter enable and then Select then the particular program what you have called will come up... Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

10/18/2011 3:28 PM	Rate (0)
alessandro.capasso Posts: 7 Rating: (0)	Hi Sir could you please tell me where can I find the number you need? the only number I can see on label is CPU 810 DE
alessandro.capasso Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

10/19/2011 8:03 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello.... You can find this information....You have OP(Operator Panel)the screen what you are seeing back side you can see this hardware.... Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

10/20/2011 10:32 AM	Rate (0)
alessandro.capasso Posts: 7 Rating: (0)	Hallo Sir we thing that the problem is in some machine parameter, because it' s like when we upload the main program in pc, the machine does not send the profile. do you have an idea of the problem?
alessandro.capasso Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

10/20/2011 12:31 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello.... Does your program what you have sent has got loaded fully.....could check this.... after this you need to load this progem to NC and then execute...... If it is possible send us the screen shot of the error what you get Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on