Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SINUMERIK 840D

Created by: AGARCIA at: 6/1/2011 9:45 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

6/1/2011 9:45 PM	Rate (0)
AGARCIA Posts: 12 Rating: (0)	HI I HAVE SINUMERIK 840D IN MACHIN CHIRON WITH PCU50, 560 MHz, WINNT, NCU 572.5 V 3.1. OP12, which has a USB PORT FRONT WHICH IS OFF. I NEED TO ACTIVATE THIS FRONT USB PORT TO TRANSFER MAINLY MPF (MACHINING PROGRAMS) I NEED TO ACTIVATE THE USB PORT?? THANKS FOR YOUR HELP
AGARCIA Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

6/2/2011 3:56 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello..... Could you tell us your HMI and NCU version version...(Diagnosis>Service Display > Version>NC version -HMI Version) Regards, Ekalavya
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

6/2/2011 7:31 AM	Rate (0)
pfuser Silver Member Joined: 9/18/2006 Last visit: 11/14/2024 Posts: 593 Rating: (64)	AGARCIA .......................................................................................... WITH PCU50, 560 MHz, WINNT, ............................................................................................ OP12, which has a USB PORT FRONT WHICH IS OFF. ............................................................................................ I NEED TO ACTIVATE THE USB PORT?? ................................................................... WinNT must have a driver for USB. In mmc.ini Section [Danste] Floppydisk = f: https://www.automation.siemens.com/tf/WW/en/Posts/16746 Best regards.

Suggestion To thank Quote Answer

6/2/2011 9:02 AM	Rate (0)
Pee El Sea Gold Member Joined: 1/19/2008 Last visit: 10/2/2024 Posts: 992 Rating: (64)	HI, I think you will find that Win NT offers no support for USB devices. Siemens wrote their own driver to enable a keyboard/mouse to be plugged in but no memory device is supported. Pee

Suggestion To thank Quote Answer

12/5/2016 1:22 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by kpqskipper is split to a separate thread with the subject Connect mouse to sinumerik 840D. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on