Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sinumerik simdrive 611 KDV FAULT alarm.

Created by: Bhutrsathorn at: 6/12/2012 9:56 AM (4 Replies)

Rating (0)

Thanks 1

5 Entries

6/12/2012 9:56 AM	Rate (0)
Bhutrsathorn Experienced Member Joined: 9/21/2010 Last visit: 2/16/2023 Posts: 15 Rating: (0)	Dear Sir Please help me to fix for this alarm(KDV _fault ..........) Sinumerik simodrive 611.

Suggestion To thank Quote Answer

6/13/2012 5:42 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (473)	Bhutrsathorn Dear Sir Please help me to fix for this alarm(KDV _fault ..........) Sinumerik simodrive 611. Hello... Provide us the alarm number then only we can able to tell u what exactly has gone wrong ??? by the by what product is this ??? 810d-840D-802D go to diagnosis screen see in alarms what exactly is there...... Regards, Prakash
Ekalavya Posts: 2964 Rating: (473)
Suggestion To thank Quote Answer

6/13/2012 10:22 AM	Rate (0)
Bhutrsathorn Experienced Member Joined: 9/21/2010 Last visit: 2/16/2023 Posts: 15 Rating: (0)	Dear sir Thank you so much. 1.Sinumerik 840d. 2.MMC103 First check. 1.Terminal 663,AS1 =24 vdc. Alarm code is in attach file. ***************Can I disable of this function and How to do.************** Attachment KDV ALARM.JPG (44 Downloads)

Suggestion To thank Quote Answer

6/13/2012 12:38 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (473)	Hello... No you cannot disable as your machine is equipped with Safety... alarms looks to be safety alarms in the machine. have you checked the pule enable i.e 663 and AS1, AS2 May be output is not coming from the card. If you have similar spare card try replacing it and check but ensure the machine functions properly as your machine is equipped with safety intergarted . Regards, Prakash
Ekalavya Posts: 2964 Rating: (473)
Suggestion To thank Quote Answer

6/15/2012 11:04 AM	Rate (0)
Bhutrsathorn Experienced Member Joined: 9/21/2010 Last visit: 2/16/2023 Posts: 15 Rating: (0)	Dear Ekalavya Thank you so much for all. According for this issue is. After NCK Reset and Power on machine. 1.No spare parts in stock. 2.AS1=24 VDC. 3.AS2= 0 VDC. 4.663 = 24 VDC. Finally. I have to repair the card by modify function of Terminal 663 inside.and then no alarm. Thank you.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ekalavya

|

Share this page:

Share this page on...

Follow us on