Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sinumerik810D CCU1

Created by: A.Pasandi at: 8/31/2011 7:58 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

8/31/2011 7:58 AM	Rate (0)
A.Pasandi Experienced Member Joined: 12/22/2010 Last visit: 1/14/2025 Posts: 97 Rating: (0)	Dear all How I can replacement (ccu1:order no:6FC5410-0AY01-0AA0)BY(CCU3:order no:6FC5410-0AY03-0AA0)? Best regads

Suggestion To thank Quote Answer

8/31/2011 8:33 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello... What do you want exactly? You can replace but NC and PLC need to recommissioned PLC CPU is differnet... 6FC5410-0AY01-0AA0 SINUMERIK 810DE CCU1 MODULE W. PLC314 WITH SYSTEM SOFTWARE, (EXPORT), 256 KBYTES NC MEMORY (MAX.EXPANSION 1.5 MBYTES) PLC: 64KB (MAX. 128KB) 6FC5410-0AY03-0AA0 SINUMERIK 810DE MODULE CCU3 with PLC 314C-2DP WITH SYSTEM SW (EXPORT) 256 KBYTE NC MEMORY (MAX.EXTENSION 1.5 MBYTE) PLC: 96 KB (MAX. 288 KB) PREPARED FOR PROFIBUS-DP Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)	Last edited by: Ekalavya at: 8/31/2011 8:34 AM
Suggestion To thank Quote Answer

11/24/2016 10:11 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by Mohamed159 is split to a separate thread with the subject SINUMERIK 810D, problem of communication between the MMC and the CPU. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on