Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SIPART DR22 vs Step7 program

Created by: LievenDHaese at: 7/20/2011 11:48 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/20/2011 11:48 AM	Rate (0)
LievenDHaese Advanced Member Joined: 5/19/2011 Last visit: 11/19/2024 Posts: 24 Rating: (1)	I'm trying to read parameters into my program from a SIPART DR22 For this I use PROFIBUS with the 6DR2803-8P card. What functions do I need to read/write the data? In most of the documentation, I found out that this has to happen with standard function blocks, but I can't find which ones... Grtz Lieven

Suggestion To thank Quote Answer

7/24/2011 2:44 PM	Rate (0)
SonicRanger Posts: 151 Rating: (8)	Hi Lieven, Have you already read the attached documentation in this download? http://support.automation.siemens.com/WW/view/en/10880616 Best Regards, SonicRanger.
SonicRanger Posts: 151 Rating: (8)
Suggestion To thank Quote Answer

7/24/2011 4:09 PM	Rate (0)
LievenDHaese Advanced Member Joined: 5/19/2011 Last visit: 11/19/2024 Posts: 24 Rating: (1)	I had not seen this yet. But I believe my problem is solved now. Thx !!

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SIPART

Follow us on