Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Sipart PS2 PA via PDM 6.0+SP2+HF1

Created by: IzaiasJunior at: 7/31/2009 4:35 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

7/31/2009 4:35 PM	Rate (0)
IzaiasJunior Member Joined: 7/9/2009 Last visit: 2/27/2024 Posts: 6 Rating: (0)	My problem is to connect on this Positioner. When I try to compare, upload, download, diagnostic or display values I receave the following messege: "The following parameter is not as expected: Profile Revision Device expecetd = 3.0 Device found = 3.1 No comunication possible" I try to find this update file of this instrument at the 'Product CD' that cames with this positioner, but I did notfound this specific revision. Where I can found it? Thanx! Attachment Sipart SP2 R3_0 Mensagem.JPG (224 Downloads)
	Silva Jr, Izaias Techical Support - Bahia - Brazil Twitter: @izaiasjr
Suggestion To thank Quote Answer

9/21/2009 10:22 AM	Rate (0)
Bilao Posts: 378 Rating: (47)	Hello IzaiasJr, i am not an expert on this topic, but maybe this thread can help you https://www.automation.siemens.com/tf/WW/en/Posts/10970 Best regards bilao
Bilao Posts: 378 Rating: (47)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SIPART

Follow us on