Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SITRANS FUP1010 & Sea water flow measurement

Created by: Ahmed Waleed at: 3/22/2011 2:42 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/22/2011 2:42 PM	Rate (0)
Ahmed Waleed Posts: 1 Rating: (0)	Dear All, Is FUP1010 suitable for sea water flow measurement? and if yes, is it better to use transit-time mode or reflexor mode. Best Regards Ahmed
Ahmed Waleed Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

3/24/2011 1:38 PM	Rate (0)
MFedele Member Joined: 12/15/2010 Last visit: 5/30/2014 Posts: 13 Rating: (0)	Ahmed-- The FUP1010 is commonly used to measure sea water. In fact, sea water is listed in the liquid look-up table contained in the meter. Generally, the Transit Time mode of operation is used, but if the application has a high degree of entrained air, Reflexor would be the recommended mode. Bill Patterson, Technical Services Manager CoC Ultrasonic Flow Siemens Industry, Inc.

Suggestion To thank Quote Answer

5/27/2016 12:51 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by U_2a90376d-1638-4bd5-a67c-9fcfb81796a8 is split to a separate thread with the subject SITRANS FUP1010, selection guide for mounting set. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on