Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

siwarex command failure

Created by: granas at: 1/20/2017 2:57 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/20/2017 2:57 PM	Rate (0)
granas Regular Member Joined: 3/9/2009 Last visit: 7/31/2024 Posts: 12 Rating: (0)	Hi. I'm currently commissioning a Siwarex U module and whenever I click on the "Set as Zero" or "Adjust" buttons I get the message "Command cannot be executed since failure." Does anybody know what this mean? As per attached jpg file Thanks. Attachment 9c20e239-0099-47e4-95e5-e771dd080d52.jpg (132 Downloads)

Suggestion To thank Quote Answer

1/30/2017 10:37 AM	Rate (0)
Siwarexi Gold Expert Joined: 1/4/2007 Last visit: 1/3/2025 Posts: 1170 Rating: (175)	Hello granas, Do you have any failure on your Siwarex U module: Is the red LED at the Siwarex U module on? Best regards Siwarexi

Suggestion To thank Quote Answer

2/8/2017 3:22 PM	Rate (0)
granas Regular Member Joined: 3/9/2009 Last visit: 7/31/2024 Posts: 12 Rating: (0)	Thanks for your response well i have not observed the red led is on or off let me check

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on