Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Siwarex FTA

Created by: LAID1 at: 1/2/2011 11:58 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/2/2011 11:58 AM	Rate (0)
LAID1 Posts: 25 Rating: (0)	Hello all, We need to replace old totalizing circuitbalances(05 units)system buy SIWAREX FTA, we need remote display of weigh and totalizationfor each siwarex using Siebert 102, local display using WINCC Flexible on PC and S7300 CPU with Profibus interface. my question is that SIEBERT unit could display both two parameters in same time. does Siwarex FTA support TEDEA model 355 strain gauge wich described in attachment ? thank you in advance
LAID1 Posts: 25 Rating: (0)
Suggestion To thank Quote Answer

1/2/2011 3:53 PM	Rate (0)
Maschex Member Joined: 12/1/2010 Last visit: 12/3/2012 Posts: 7 Rating: (0)	Dear Laid1, I can't find an attachment on this mail. Please send the data-sheet of your loadcell with your question to siwarex.hotline.aud@siemens.com and you will get an answer. The SIEBERT display can show one value only. You have to choose the parameter you want toshowwith help of two push-buttons on the top ofthe SIEBERT. Regards, Maschex

Suggestion To thank Quote Answer

1/2/2011 10:58 PM	Rate (0)
LAID1 Posts: 25 Rating: (0)	Please accept my greet thanks for your help
LAID1 Posts: 25 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on