Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Siwarex ms Microscale_V20 library

Created by: yusp at: 5/4/2009 2:46 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/4/2009 2:46 AM	Rate (0)
yusp Posts: 1 Rating: (0)	Hi, I use CPU224 and one Siwarex ms module to weight. Is there difference in this:in step7 call microscale_V20 to get process value, or just directly use AIW0 to get the weight value? use the library, it cost 3 ms to execute, but use AIW0 only cost little. In my test, both of these twomethod get same weight value.
yusp Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

5/11/2009 12:18 PM	Rate (0)
Siwarexi Gold Expert Joined: 1/4/2007 Last visit: 9/28/2023 Posts: 1061 Rating: (157)	Dear yusp, Both weight values are the same: Theweight valuein step7 call microscale_V20 and theAIW0. The disadvantage of the AIW0 and not using the library microscale_V20 is, that you can not execute commands, like taring and so on. If you want to execute commands via Step7, you have to use the library microscale_V20. Best regards Siwarexi

Suggestion To thank Quote Answer

11/25/2013 1:27 PM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 9/16/2023 Posts: 2683 Rating: (135)	New question splitted to microscale_v20.mwl/microscale_add.mwl Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on