Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Siwarex U commissioning with Siwatool

Created by: pongcruz at: 3/12/2006 5:08 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

3/12/2006 5:08 AM	Rate (0)
pongcruz Posts: 2 Rating: (0)	Hi. I'm currently commissioning a Siwarex U module and whenever I click on the "Set as Zero" or "Adjust" buttons I get the message "Command cannot be executed since failure." Does anybody know what this mean? Thanks.
pongcruz Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

7/2/2011 2:23 PM	Rate (0)
ni1 Posts: 50 Rating: (0)	Hi, May be some set value is wrong in calibration. If u cannot get suitable weight for adjustment weight, using theoritical adjustment is better. attached is siwarexu quick guide for urs reference. Best regards, ni Attachment SIWAREX_U_Quick Guide_V4.0.pdf (535 Downloads)
ni1 Posts: 50 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on