Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Siwarex U Load cell processor -Need Help

Created by: Pintu at: 3/13/2008 11:08 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/13/2008 11:08 AM	Rate (0)
Pintu Posts: 15 Rating: (0)	Dear all , I am trying to connect a Siwarex U (2 channel)load cell processor with the S7 313C CPU. But The SF ( System failure ) LED of the Siwarex is always getting ON . I connected the 2 load cell to the 2 channels ( using 4 wire technology). Please help me to solve this problem Thanks in advance Vikas
Pintu Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

3/13/2008 2:33 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 7/12/2023 Posts: 10221 Rating: (1177)	Hi What did indicate the diagnosic buffer of SIWAREX U in Step 7? May be you will find something in manual SIWAREX U. P.S. To be able to indicate the diagnosticbufferyou need SIWAREX U configuration package (order no. 7MH4 683-3AA6*). regards

Suggestion To thank Quote Answer

3/14/2008 3:21 PM	Rate (0)
Greg R Posts: 6 Rating: (0)	I use about 20 of these cards in our plant. I use the software to set them up and it is a good way to trouble shoot problems. If you need some more info I would be glad to help.
Greg R Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on