Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

siwarex u module

Created by: amir omidi at: 3/9/2022 9:02 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

3/9/2022 9:02 AM	Rate (0)
amir omidi Regular Member Joined: 6/1/2018 Last visit: 12/6/2024 Posts: 10 Rating: (0)	Hello We have a siwarex u card that is damaged(order num.: 7mh4950-1aa01) We want to replace it with a new card (order num.: 7mh4950-2aa01) I changed the card in the HW Config I have downloaded and installed the "siwatool U demo" software and connected to the card (7mh4950-2aa01) from the serial port, but after setting the parameters, I can notsendthe information to the card because the "send button"is not active and I do not know the reason. Please help me... Thank you so much

Suggestion To thank Quote Answer

3/9/2022 5:53 PM	Rate (0)
Siwarexi Gold Expert Joined: 1/4/2007 Last visit: 12/11/2024 Posts: 1159 Rating: (175)	Hello amir omidi, You work with the Siwatool U Demo-version. With the Demo-version, you can’t send parameters. With the Demo-version, you can only read the parameters, and store a Siwatool file on your computer. If you want to change paramters in the Siwarex U module with the Siwatool software, you have to buy this software. Please ask your Siemens agent, if you would like to buy this software. The Siwatool software is no freeware. Best regards Siwarexi

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users amir omidi

3/10/2022 5:33 AM	Rate (0)
amir omidi Regular Member Joined: 6/1/2018 Last visit: 12/6/2024 Posts: 10 Rating: (0)	hi thank you so much mr siwarexi.
	Last edited by: amir omidi at: 03/10/2022 05:36:05
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on