Siwarex WP231 v3.1.1

Hello yaray,

To your questions:

1- Is it possible to config 6 wp231 in one 1217c CPU?

=> Yes, you can configure up to 8 WP231 modules in one 1217c CPU.

2- Except Tia Portal V14SP1, Do I need another Software?

=> No. You need no other software.

But I recommend you to use also the Siwatool software.

The Siwatool software is a commissioning software:

With this software you can connect directly a laptop to one WP231 module.

You can execute quite easy a calibration, or if there are any issues on the scale, you will find the fault quite easy.

Also you can generate a backup-file with all parameter settings of the scale on yor laptop.

3- According to the attach file in Tia v14sp1 I can not see the WP231 version in Hardware Catalog , and I Could not find a HSP file for that, Is it normal or I should do something to fix that?

=> There exist no HSP file.

The firmware of the WP2312 module is not important for the PLC.

Therefore you can’t choose different WP231 modules.

4 - How to access ready_for_use_s7 example in Tia v14sp1?

=> Copy all blocks from the ready_for_use_s7 example project to your S7 program.

Call the FB231 into your OB1 (or a FB) with an own Instance-DB for each WP231 module..

Use also the FC30 into the OB35.

Best regards

Siwarexi