SLC-504 with the ENI adapter: No luck communicating with TP700 comfort panel.
Created by: Patricia Yvette at: 7/9/2017 5:58 AM (4 Replies)
Rating 
Thanks 0
5 Entries
| 7/9/2017 5:58 AM | |
|
Posts: 3 Rating:
|
Looks like I am the latest with this problem. Has anyone found an answer yet? I am running a SLC-504 with the ENI adapter. Communication with my laptop works great even through my switch but no luck communicating with my TP700 comfort panel. I can swap out the processor for a 505 and the HMI converses with it fine at my work bench but when I toss the 505 into the machine the thing rebels so I have to keep the 504. Thank you for any help Patricia ------------------------------------------------------------------------------------------ |
Last edited by: Patricia Yvette at: 7/9/2017 6:04:17 AMLast edited by: Jen_Moderator at: 7/10/2017 2:05:41 PMNew subject after splitting |
|
| 7/31/2018 12:00 PM | |
|
Posts: 2 Rating:
|
Facing same problem!. I've got TIA Portal V13 WinCC Advanced scada, an SLC 5/05 with ethernet port integrated in CPU and no problem comunicating with, but with another SLC 5/04 with 1761-NET-ENI and I've tryed almost and nothing to do it is impossible to comunicate. Does any body know smothing? |
| 1/4/2019 1:32 PM | |
|
Posts: 2 Rating:
|
Facing exaclty the same problem. Does any body know something? |
| 10/23/2019 8:26 AM | |
Joined: 6/1/2006 Last visit: 12/17/2024 Posts: 129 Rating:
|
Hello Patricia Yvette, communicating through the NET-ENI bridge is actually not all that different as your laptop shows. The communication path setting should stay at the default setting '1,0' as the SLC processor, the connection endpoint, sits in slot 0. I hope I could help. |
| 9/13/2024 5:44 PM | |
|
Posts: 1 Rating:
|
I have the same problem? Did you find a solution? If so, please share. It seems to me that the problem is the "path communication (1,0)", I suppose it must be something else but I don't know what to put. |
Last edited by: AutoGen_5446937 at: 09/13/2024 17:49:03 |
|