Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SM 326F Time Stamping

Created by: mazdak at: 10/24/2010 7:14 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

10/24/2010 7:14 AM	Rate (0)
mazdak Posts: 64 Rating: (0)	Dear All As you know, SM 326 DI has the capability of “Time Stamping” in conjunction with ET-200M (according to catalog). I’ve seen in my friend’s Step-7 that’s configurable via: HW Config > Object Property > Parameters Tab > Time Stamping check box. But I cannot see this option in my Step-7. How can I activate/deactivate it? Sincerely Mazdak
mazdak Posts: 64 Rating: (0)
Suggestion To thank Quote Answer

10/24/2010 5:34 PM	Rate (0)
Aret Posts: 2348 Rating: (259)	Your ET200M should have high feature functionality. If it does, but still you can't configure it - upload HW config here.
Aret Posts: 2348 Rating: (259)
Suggestion To thank Quote Answer

11/1/2010 11:27 AM	Rate (0)
_Matty_ Posts: 2 Rating: (0)	I have the same question, heres a archived test config. Thank You, Matthew
_Matty_ Posts: 2 Rating: (0)	Last edited by: _Matty_ at: 11/2/2010 10:55 AM
Suggestion To thank Quote Answer

11/2/2010 6:45 AM	Rate (0)
Aret Posts: 2348 Rating: (259)	Sorry, guys, just realized you're talking about 326. According to http://support.automation.siemens.com/WW/view/en/15014885 Only 321 (and not all of them) is suitable for this purpose.
Aret Posts: 2348 Rating: (259)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on