Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SMART LINE MODULE 6SL3330-6TE37-3AA3 FAULT 30027 &6000

Created by: sergino at: 8/5/2011 12:19 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

8/5/2011 12:19 PM	Rate (0)
sergino Regular Member Joined: 3/31/2011 Last visit: 8/25/2021 Posts: 20 Rating: (0)	Hi everybody, i'm starting a system with a smart line module,object of the thread. The sequence stops at pre-charcing step and the by-pass contactor doesn't close.Then faults 6000 and 30027 appear. There is somebody who canhelp me regarding the problemwhile I'm waiting official response from Siemens? Thank you

Suggestion To thank Quote Answer

8/5/2011 12:36 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 2/6/2023 Posts: 21225 Rating: (2798)	Hello, have you control your power input? Control the parameter R69 and R25. regards Christoph

Suggestion To thank Quote Answer

8/5/2011 5:07 PM	Rate (0)
sergino Regular Member Joined: 3/31/2011 Last visit: 8/25/2021 Posts: 20 Rating: (0)	Hi everybody!! Problem fixed. It was a plug disconnected in one of the internal cards Thank you very much anyway for the prompt answer!!!

Suggestion To thank Quote Answer

2/7/2013 6:59 PM	Rate (0)
burroaktyson Experienced Member Joined: 2/7/2013 Last visit: 1/10/2023 Posts: 21 Rating: (0)	Hi, I am encountering the same faults here, may I know what you did more specifucally to fix this problem?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on