Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SmartTags(var with string of name) accessing faceplate tags fails

Created by: Eindhoven at: 1/8/2015 2:56 PM (8 Replies)

Rating (0)

Thanks 3

9 Entries

1/8/2015 2:56 PM	Rate (0)
Eindhoven Posts: 17 Rating: (3)	Hi Siemens and experts, In a faceplate, i have created a script and faceplate-local tags. I am hoping to access these tags by means of SmartTags(), so i can easily iterate over them. The code does however not respond as expected. [code]Dim i 'iterator Dim s 'string for storing the tag's name Dim v 'storage for the value the tag contains i = 1 s = "Properties\someString" & i & "someMoreString" v = SmartTags(s)[/code] The script stops execution on the last step. Found this out by setting another internal tag and displaying this on the faceplate, incrementing it on various positions in the script. Also, assigning s to an faceplate-internal-string-tag and displaying this on the faceplate indicates the expected contents "someString1someMoreString". Replacing the last line with v = SmartTag("someString1someMoreString") does work. The SmartTag(s) works in a "global" HMI script as well. Is there any explanation for this, does anywone recognise this problem and/or is there an workaround? Kind regards and thanks for your time in advance. Edit: The offending tag is a member of the faceplate properties, changed code example to reflect this. Edit 2: Corrected the command name from "SmartTag" to "SmartTags".
Eindhoven Posts: 17 Rating: (3)	Last edited by: Eindhoven at: 1/12/2015 3:25 PM Last edited by: Eindhoven at: 1/12/2015 10:38 AM
Suggestion To thank Quote Answer

1/27/2015 5:01 PM	Rate (0)
Eindhoven Posts: 17 Rating: (3)	This afternoon i had contact with Siemens Tech support about this problem. Appearently it is a known problem and should be fixed in the new service pack or update. The update is not scheduled soon tough...
Eindhoven Posts: 17 Rating: (3)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Min_Moderator

1/29/2015 7:51 AM	Rate (0)
WojciechJ Posts: 6 Rating: (1)	It looks like new patch will solve my problem as well. https://www.automation.siemens.com/tf/WW/en/Posts/120954#top Hope new patch will be avaliable soon.
WojciechJ Posts: 6 Rating: (1)
Suggestion To thank Quote Answer

12/16/2015 4:33 PM	Rate (0)
Bugger Posts: 3 Rating: (0)	I have had this problem for some time now and have not seen a fix for this though it has been promised for several years. It gives a system error "Error no tag "MyStringVariable" in line ##. Unfortunately, I am not just iterating but am using it for a search routine. I cannot just write out the multiple iterations because I am passing a string for the variable to be searched(as a smart tag) and it is not being recognized. I noticed that if I use the variable on the other side of the equal signs and assign it to a value, it now recognizes it even in the following line. It seems there should be someway of making the processor recognize the tag without having to overwrite it.
Bugger Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

8/16/2019 4:41 PM	Rate (0)
Bugger Posts: 3 Rating: (0)	I have discovered, by accident, that if you first use the statement If VarType(TagAsString) > 0 then NoOp = 0 End If SmartTags(TagsAsString) = Value that the system will recognize the variable and then will accept it on the left side of the equal sign in later uses of the variable. TagAsString is a string representation of the value that you want to access with smartTags NoOp is used just to satisfy that there is something for the conditional to do
Bugger Posts: 3 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Jen_Moderator robert.gu

12/9/2019 4:27 PM	Rate (0)
olivluca Advanced Member Joined: 5/22/2019 Last visit: 11/28/2023 Posts: 43 Rating: (0)	Your workaround doesn't seem to work in tia 15.1 Really, this is unbelievable, only Siemens could totally screw up these basic things.

Suggestion To thank Quote Answer

12/10/2019 5:03 PM	Rate (0)
olivluca Advanced Member Joined: 5/22/2019 Last visit: 11/28/2023 Posts: 43 Rating: (0)	I found out that variables in a faceplate will generate a variable in the global namespace of the form <variable_name>_<instance_name>_<screen_name>_<variable_id>_<faceplate_id> variable_id is a different number for each variable, faceplate_id is the same number for every element in the same faceplate. The bug is that SmartTags inside a faceplate should look for this generated name, e.g. TagName="Pepe" SmartTags(TagName) should look for "Pepe"_<instance_name>_<screen_name>_<variable_id>_<faceplate_id> instead of plain "Pepe". I can easily determine instance_name and screen_name but it's not possible to know in advance variable_id and faceplate_id, only Siemens can fix that, but I guess they won't: they only add new broken features and never fix anything.

Suggestion To thank Quote Answer

12/11/2019 11:25 AM	Rate (0)
Nzett11 Silver Member Joined: 11/14/2018 Last visit: 10/31/2023 Posts: 502 Rating: (67)	Hello olivluca, which WinCC do you use? (You're using faceplates, so I guess it must be either Advanced or Professional...) Greetings, Nzett11
	If I could help you, be so kind and rate my contribution. :) Best regards
Suggestion To thank Quote Answer

12/11/2019 12:28 PM	Rate (0)
olivluca Advanced Member Joined: 5/22/2019 Last visit: 11/28/2023 Posts: 43 Rating: (0)	Advanced

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on