Hello,

i have configured a FB for TSEND_C as follows:

#PartnerInfo.ID := #ConnectionID;
#PartnerInfo.InterfaceId := #HardwareID;
#PartnerInfo.PhoneNumber := #PhoneNumber;
#CONT := TRUE;
#TSEND_C_Instance(REQ:=#REQ,
                  CONT:=#CONT,
                  LEN:=#MessageLength,
                  DONE=>#DONE,
                  BUSY=>#BUSY,
                  ERROR=>#ERROR,
                  STATUS=>#STATUS,
                  CONNECT:=#PartnerInfo,
                  DATA:=#TEXT_Message,
                  COM_RST:=#COM_RST);

and i programmed a FB for SMS_Broadcast with 3 phone numbers for example, when i REQ the SMS_Broadcast FB, the message is sent to the first phone number only but the message is sent 3 times "# of phone numbers inside the array". my question, do i need to disconnect the TSEND_C after the message is sent to every Recipient?

i'm using the TSEND_C since i have a CP 1242-7 V2 CPs.

Thanks in advance

Normal 0 false false false EN-US X-NONE AR-SA

New question published by capitan4225 is split to a separate thread with the subject Can not configure the Tsenc.

Best regards
Jen_Moderator