Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

snmp driver

Created by: TEENS at: 4/28/2009 11:01 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/28/2009 11:01 AM	Rate (0)
TEENS Posts: 23 Rating: (1)	HI Is there any inbuilt SNMP driver in WinCC. This is used for reading the port status of rugged com switch. can any one help me in this Regards Rohini
TEENS Posts: 23 Rating: (1)
Suggestion To thank Quote Answer

4/28/2009 1:37 PM	Rate (0)
jaromir Bronze Member Joined: 3/6/2008 Last visit: 2/5/2021 Posts: 139 Rating: (18)	Hi TEENS I solve this problem using OPC server. If you use the SimaticNET, you can activate OPC server which is able to communicate with your switch using SNMP protocol. And this OPC server can send data to WinCC. Jaromir
	Jaromir Hladik DEL a.s. Strojirenska 38 591 01 Zdar nad Sazavou http:\\www.del.cz
Suggestion To thank Quote Answer

4/28/2009 2:36 PM	Rate (0)
INS Gold Member Joined: 4/6/2006 Last visit: 2/5/2024 Posts: 604 Rating: (56)	Hi, i think that this tool answers your questions. https://www.automation.siemens.com/net/html_76/produkte/040_snmp.htm
	Best regards, INS
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on