Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SNMP OPC, CP 1613.

Created by: xanax22 at: 5/24/2008 12:16 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

5/24/2008 12:16 AM	Rate (0)
xanax22 Posts: 2 Rating: (0)	Hello, I want to show in a view WinCC 6.2(server) the agents SNMP of a switch Scalance 204-IRT with OPC. My problem is that I use CP1613 for connection in the process and this CP allows definitely WInCC to communicate but not for OPC? Why? Cp works well for communication in the process for WinCC and not for OPC! If I use standard card IE communication works without problem for OPC, but I want to use CP1613. Can you help me? THANK YOU. infos: Cp 1613 hardware version 102 Cp 1613 Firmware06.33 Driver V 6.640.303.3272 PG/PC interface = S7ONLINE CP 1613 (RFC1006) OPC v6.4 Best Regards.
xanax22 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

5/27/2008 11:41 AM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, found FAQ http://support.automation.siemens.com/WW/view/en/25720202
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

6/7/2008 12:44 PM	Rate (0)
xanax22 Posts: 2 Rating: (0)	Thank you for your help. But I did not achieve has find a resolution has my problem. Attachment Online interface.GIF (72 Downloads)
xanax22 Posts: 2 Rating: (0)	Last edited by: xanax22 at: 6/8/2008 7:48 AM here is a copy of screen
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on