Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SNMP Support in WinCC 6.2

Created by: deeptalk at: 11/12/2008 10:53 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

11/12/2008 10:53 AM	Rate (0)
deeptalk Posts: 3 Rating: (0)	Hi, It is required to get diagnostic informations like port status of Ruggedcom switches in WinCC. Ruggedcom provides these information on SNMP. I would like to know whether WinCC supports SNMP. If yes what components needs to be added and the configurations to be done. Regards, Deepak
deeptalk Posts: 3 Rating: (0)	Last edited by: deeptalk at: 11/12/2008 10:55 AM
Suggestion To thank Quote Answer

11/14/2008 10:59 AM	Rate (0)
perdahlqvist Gold Member Joined: 10/26/2005 Last visit: 9/13/2024 Posts: 284 Rating: (50)	Hi! SNMP-OPC licens is required. Using "Search" http://support.automation.siemens.com/WW/view/en/27727462

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on