Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Soft switch

Created by: gerrysmith at: 5/22/2018 12:07 PM (3 Replies)

Rating (1)

Thanks 0

4 Entries

5/22/2018 12:07 PM	Rate (0)
gerrysmith Advanced Member Joined: 7/6/2017 Last visit: 9/24/2022 Posts: 14 Rating: (0)	Good day. Hopefully someone can help. I’m trying to use a “soft switch” in my program, as a normally open momentary push button. My trouble is when I apply an enable input to “EN”, I cannot get the output to change to 1. I’ve looked at the help associated with the switch but I’m still baffled why I cannot get it to change!

Suggestion To thank Quote Answer

5/22/2018 1:46 PM	Rate (1)
NIBOU Bronze Member Joined: 10/20/2015 Last visit: 9/5/2023 Posts: 94 Rating: (19)	Hello gerrysmith Softkey is an FB that is to be used with LOGO display or TD. Take a look at the attached file. I hope this helps. Attachment Softkey.PNG (110 Downloads)

Suggestion To thank Quote Answer

5/22/2018 2:21 PM	Rate (0)
gerrysmith Advanced Member Joined: 7/6/2017 Last visit: 9/24/2022 Posts: 14 Rating: (0)	Ok thank you, I was using it in my program but not with TDE, just coming from another INPUT

Suggestion To thank Quote Answer

5/22/2018 2:37 PM	Rate (0)
NIBOU Bronze Member Joined: 10/20/2015 Last visit: 9/5/2023 Posts: 94 Rating: (19)	You welcome gerrysmith.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on