Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Software package required

Created by: edek at: 2/2/2012 9:14 AM (5 Replies)

Rating (0)

Thanks 1

6 Entries

2/2/2012 9:14 AM	Rate (0)
edek Bronze Member Joined: 7/20/2006 Last visit: 5/25/2023 Posts: 113 Rating: (8)	Hello, I have the problem with missing software at my pc. When I'm opening project such message appear, check attachment please. Do you know what should I install? regards Edek Attachment simatic.JPG (71 Downloads)

Suggestion To thank Quote Answer

2/2/2012 9:31 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 4/12/2023 Posts: 10221 Rating: (1176)	Hello Edek, The main question is - what do you need to install? You should ask the owner of that project in order to confirm you which software were used and need there? It is possible that in owner PC were installed all that software and because he made the last changes and archieved the project, now you receive that message. But in reality these software are not used in project. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users edek

2/2/2012 12:30 PM	Rate (0)
billwest Posts: 510 Rating: (117)	In the attachment you posted there is an execute button.If youselect the button (click on), Step 7 willcheck through the project for the actual packages required. It will ignore packages installed where the project was created. This should remove some of the unknown packages. It will take a while to complete . The larger the project, the longer it will take. Good luck, billwest
billwest Posts: 510 Rating: (117)
Suggestion To thank Quote Answer

2/2/2012 2:55 PM	Rate (0)
edek Bronze Member Joined: 7/20/2006 Last visit: 5/25/2023 Posts: 113 Rating: (8)	Hello, I've already pressed excecute button, but effect was the same. Any ideas how can get to know what software I need? Or what can I do just to display this message with full list of characters? regards Edek

Suggestion To thank Quote Answer

2/2/2012 5:01 PM	Rate (0)
billwest Posts: 510 Rating: (117)	The easiest answer wasprovided previously,talk to the last person that programmed the project. Looking over your attacment, the "unknown" could be a lot of things. Open your hardware config. If there are drives in the config, then it is one of the Drives pakagages. Also check the hardwareto see if you have any devices that are not displayed as icons. This would indicate missing GSD files. Also in the hardware look for function modules. Function modules can require configuration packages. But again, if the software is not installed on your PC you are going to have to get it from some body. The some body may be the person that last programmed the project. Good Luck, billwest
billwest Posts: 510 Rating: (117)
Suggestion To thank Quote Answer

5/13/2013 7:43 PM	Rate (0)
UNIQUE Posts: 14 Rating: (0)	Hi This message will appear when your project is integrated with following packages,so you need to install them.
UNIQUE Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on