Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

SOLVED: Using Duplicate (protected) FC numbers

Created by: TheMisfit at: 3/14/2009 9:20 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/14/2009 9:20 PM	Rate (0)
TheMisfit Posts: 55 Rating: (1)	I have a project in which I have to use two different (library-) FC's that have the same FC-number FC6 AG_RECEIVE and FC6 DT_DATE Can I renumber one of these protected FC's without a problem?
TheMisfit Posts: 55 Rating: (1)	Last edited by: TheMisfit at: 3/15/2009 2:13 PM
Suggestion To thank Quote Answer

3/14/2009 9:36 PM	Rate (0)
Ssc_Mikro Posts: 196 Rating: (12)	He There yes you can, it wont afect the code inside the blokc.
Ssc_Mikro Posts: 196 Rating: (12)
Suggestion To thank Quote Answer

3/15/2009 6:44 AM	Rate (0)
Eastern Posts: 557 Rating: (64)	FC6 AG_RECEIVE and FC6 DT_DATE hi this is possible. if suppose your program is already FC6 AG_RECEIVE is their, & you will try to call FC6 DT_DATE in your program , simatic manager is automaticlly identified & ask to programmer to change the block number, but the inside program would be the same. regards
Eastern Posts: 557 Rating: (64)
Suggestion To thank Quote Answer

3/15/2009 2:12 PM	Rate (0)
TheMisfit Posts: 55 Rating: (1)	Thanks guys
TheMisfit Posts: 55 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on