Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Some symbol diaplaying along with Alarm

Created by: ŠΜS at: 2/1/2011 2:27 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

2/1/2011 2:27 PM	Rate (0)
ŠΜS Silver Member Joined: 6/7/2010 Last visit: 7/9/2024 Posts: 571 Rating: (37)	Hi, Find the attached alarm screen, while display ,in some alarm Time stamp:05AN & some more symbols are displaying. Why it is occurring ? Attachment DSC03514.JPG (95 Downloads)
	Regards, ŠΜS
Suggestion To thank Quote Answer

2/1/2011 6:33 PM	Rate (0)
TSH Posts: 73 Rating: (2)	Hello, The alarm is a machine manufacturer alarm. Siemens will not have any information about this. Regards.
TSH Posts: 73 Rating: (2)
Suggestion To thank Quote Answer

2/1/2011 6:33 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hi... Kindly cross check the file alp_uk file what you have renamed in your project . May be ('xxxxxx")inverted comas need to closed properly kindly check the same.... Don't modify any contents in your alp_uk file...just modify the name alone... Check it properly...it should work.... Regards, Ekalavya
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

2/4/2011 5:51 PM	Rate (0)
ŠΜS Silver Member Joined: 6/7/2010 Last visit: 7/9/2024 Posts: 571 Rating: (37)	Ekalavya Hi... Kindly cross check the file alp_uk file what you have renamed in your project . May be ('xxxxxx")inverted comas need to closed properly kindly check the same.... Don't modify any contents in your alp_uk file...just modify the name alone... Check it properly...it should work.... Regards, Ekalavya Thanks for your suggesion , problem solved. I created an new folder named Alarm and loaded back the alarms.
	Regards, ŠΜS
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ekalavya

|

Share this page:

Share this page on...

Follow us on