Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

sparate acknowledge

Created by: ferizal2000 at: 12/10/2007 12:20 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

12/10/2007 12:20 PM	Rate (0)
ferizal2000 Posts: 2 Rating: (0)	Hi all, I send alarm from PLC (S7-400) to two stand-alone PC with WinCC by alarm 8 block. When alarm incoming, then operator acknowledge the alarm on one of the PC, the other PC also acknowledge the same alarm. But my customer did not want something like that, he wants separate acknowledge for two PC. Is it possible ? If yes, can you tell me how ? Thank's Ferizal
ferizal2000 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

12/11/2007 10:51 AM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, this is only possible with the "Bit message procedure" Maybe the FAQ http://support.automation.siemens.com/WW/view/en/24707635can give some informations for the solution. April
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on