SiePortal

The integrated platform for your product selection, buying and support workflow - bringing together Industry Mall and Online Support.

Products & Services
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Support Support
{{(apiData.Support | filter:{'rank':1}:true)[0].title}} Support
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
MySiePortal MySiePortal
{{(apiData.MySiePortal | filter:{'rank':1}:true)[0].title}} MySiePortal
- Menu temporary not available
- Menue temporary not available
- {{item.title}}
Cart ({{apiData.CartCount}})

Navigation

Spinner VC610 Sinumerik810D-MDA not responding

9/4/2009 11:11 AM	Rate (0)
defender Posts: 18 Rating: (0)	Dear experts, Our CNC machine have had its software reinstalled. We can reference the axes successfully and move the axes in JOG modebut if we want to operate it in MDA mode, the machine do not respond. Simple commands like G91 G01 X10 or S200 M03 don't seem to work. I will appreciate if somebody can advise as to what may be wrong. defender
defender Posts: 18 Rating: (0)
Suggestion To thank Quote Answer

9/4/2009 1:17 PM	Rate (0)
RAM81 Silver Member Joined: 3/3/2008 Last visit: 4/9/2025 Posts: 333 Rating: (52)	hi do you get any alarms? when you try to run the program whether the channel is in reset? does the cycle start input work? regards ram

Suggestion To thank Quote Answer

9/4/2009 3:19 PM	Rate (0)
nulizhang Platinum Expert Joined: 10/17/2007 Last visit: 4/23/2025 Posts: 4294 Rating: (377)	Hi, did u try to make a short NC program and test in AUTOMATIC. is there any alarms?
	If you like my comments please use "Thank" bottom left or Rating Top right
Suggestion To thank Quote Answer

9/4/2009 3:47 PM	Rate (0)
defender Posts: 18 Rating: (0)	I dont get any alarms at this point. The only thing I see is flashing msg F=0.00. for axes and spindle
defender Posts: 18 Rating: (0)
Suggestion To thank Quote Answer

9/4/2009 3:48 PM	Rate (0)
defender Posts: 18 Rating: (0)	I have not tried AUTOMATIC with a short program, I will do this and let you know. many thanks
defender Posts: 18 Rating: (0)
Suggestion To thank Quote Answer

9/7/2009 3:30 PM	Rate (0)
defender Posts: 18 Rating: (0)	Hi, I have tried a short NC program in AUTOMATIC mode but also I get no movements. Kindly advise, defender
defender Posts: 18 Rating: (0)
Suggestion To thank Quote Answer

9/7/2009 7:35 PM	Rate (0)
alcor Posts: 13 Rating: (1)	If there is no alarm/mesage on screen you may have the following situations: - Feed disable for channel/axes (DB2x.DBX6.0, DB3xDBX , ...) Setting these bits do not trigger any alarm. Axes movement is disabled. Executing NC commands like R1=12 in MDA or AUTO should work. - Read in disable for channel (DB2x.DBX6.1). Setting this bit does not trigger any alarm. No line is read (or executed) in MDA or AUTO. Sometimes, a small "notification" may appear below alarm area (in channel status area / program status area). - "Cycle Start" key on MCP masked (input overwritten or any other method). Search for the input in PLC programm using S7. - Something I don't know (and here we may write many many books about what one do not know). Ask someone else or write it on Siemens Forum. Contact Spinner, they offer technical support for own customers.
alcor Posts: 13 Rating: (1)
Suggestion To thank Quote Answer

9/7/2009 7:44 PM	Rate (0)
alcor Posts: 13 Rating: (1)	Insert this before "I don't know" option: - check status of Feed Override (check PLC inputs, check signals DB3x.DBB0 - here is the Feed override directly to axis interface. Feed = 0 may be from here.). - check if the machine operator have a sick sense of humor. Sometimes settings in the "Parameters" area (done by operators or machine setters) may have some "funny" reactions. Since these are "settings" choosed by machine user/operator/setter, they are not considered alarms and no info is displayed.
alcor Posts: 13 Rating: (1)
Suggestion To thank Quote Answer

Share this page:

Share this page on...