Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Standard switch instead of a Scalance X280

Created by: Oreca at: 4/17/2010 2:34 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

4/17/2010 2:34 PM	Rate (0)
Oreca Platinum Member Joined: 3/14/2008 Last visit: 1/20/2025 Posts: 2162 Rating: (973)	Can I use just a "normal" (no expensive Siemens component)switch on my plant bus to connectone AS, one ES and one OS single station? from thirdparty manufacturer
	Last edited by: Oreca at: 4/17/2010 3:37 PM If I could help you, you can use the RATE button. Thank you. Prospact Netherlands...your PCS7 and PCS neo Expert Topic: PCS7 Complete Overview
Suggestion To thank Quote Answer

4/19/2010 9:42 AM	Rate (0)
zerepegro Posts: 183 Rating: (8)	Hello; There is no problem but please keep in mind next things about a standard switch: - You can't use profinet - You can't diagnose differences between old and new IP configured in one port. - You can't diagnose fault in the power source - You can't filter traffic (through IP or MAC) - You can'tuse the web inside the switch to diagnose - You can't use the switchelectriccontact to show a fault.
zerepegro Posts: 183 Rating: (8)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on