Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Start up runtime problem - WinCC 6SP4 no connect with S5 on PROFIBUS FMS

Created by: Dimbas at: 6/30/2008 10:48 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/30/2008 10:48 AM	Rate (0)
Dimbas Posts: 75 Rating: (0)	Yai My customer's having a problem about startup runtime. The problem started from the customer closed WinCC explorer, while the runtime is running. Thenafter he was trying to activate runtime again,WinCC try to activate for a while then goto deactivate automatically. I tried to resetWinCC byrunningfile ResetWinCC but the problem still the same. And also I had a look in folder diagnose. I foundWinCC tried to run but failed. However, I have not known the cauase of problem yet. Ihave attached the log file. Possibly anyone could help me to analyze theproblem. Thank you Attachment:Diagnose.zip Start up runtime problem Similar problem, error from log file: Unit 0 of CommunicationDriver "PROFIBUS FMS" cannot be started in configuration mode, dwError1 = 1da53b8, dwError2 = 24b, dwError3 = 178bc0 Error during initialization of the FMS hardware CP5412/A2. Apply CP5613A2 card.... WinCC 6SP4 no connect with S5 on PROFIBUS FMS How to solve problem?
Dimbas Posts: 75 Rating: (0)	Last edited by: CS Moderator at: 7/4/2008 4:36 PM new subject after splitting referend thread inserted
Suggestion To thank Quote Answer

7/4/2008 10:59 AM	Rate (0)
Dimbas Posts: 75 Rating: (0)	Dear experts! Give advice how to solve a problem
Dimbas Posts: 75 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on