Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

STARTER S120 CU320 FW

Created by: vorapob at: 10/11/2017 6:15 AM (24 Replies)

Rating (0)

Thanks 1

Result pages:: |; 1 | 2 | 3; |

25 Entries

Entries per page: 10 | 20 | all

10/12/2017 8:21 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 3/30/2023 Posts: 21352 Rating: (2820)	Hello, help -> installed devices , i say this in a former post. in the list you can check which ssp are installed. the CF Card can read whit a normal USB Card Reader, no special Siemens Prommer or reader need. The parameter/program data are stored in the USER directory on the Card.

Suggestion To thank Quote Answer

10/12/2017 9:05 AM	Rate (0)
vorapob Gold Member Joined: 1/17/2013 Last visit: 3/22/2023 Posts: 999 Rating: (5)	Dear Christoph, Thank you very much for your suggestion. So, How can I copy the new FW V4.7 to the CF Card ? Best Regards, Vorapob
	Best Regards, Vorapob
Suggestion To thank Quote Answer

10/12/2017 9:15 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 3/30/2023 Posts: 21352 Rating: (2820)	Hi, download the Latest V4.7 https://support.industry.siemens.com/cs/ww/en/view/92522512 Power Off CU remove the CF from CU Put CF in Card Reader Backup the complete CF to local storage (Copy) Delete alle Folders expect the USER and the KEY Folder Extract the new FW to the CF Card (USER must not extractet) Put the CF in the CU and PowerrON Regards Christoph

Suggestion To thank Quote Answer

10/13/2017 6:26 AM	Rate (0)
vorapob Gold Member Joined: 1/17/2013 Last visit: 3/22/2023 Posts: 999 Rating: (5)	Dear Experts, My job done already I install SSP V4.3.1 in STARTER 4.4. Thank you very much. Best Regards, Vorapob
	Best Regards, Vorapob
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users iqp.aleem

3/26/2018 7:53 AM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 3/30/2023 Posts: 6711 Rating: (130)	New question published by Zyad is split to a separate thread with the subject Want to judge Cu320 through the starter program. Best regards Jen_Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Jen_Moderator
Suggestion To thank Quote Answer

Result pages:: |; 1 | 2 | 3; |

25 Entries

Entries per page: 10 | 20 | all

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on