Navigation

Startup G120 CU240E-2 PN with S7300 Via profinet

Created by: asjsadcohst at: 4/6/2016 1:42 PM (1 Replies)

4/6/2016 1:42 PM	Rate (0)
asjsadcohst Posts: 1 Rating: (0)	Hi All, I would like to startup G120 CU240E-2 PN with S7300 Via profinet , the communication between VFD & S7300 is approve , at the same time the VFD is not starting , anybody help me to solve this issue, pleas check attached PLC program ( PLC Development Software is Step7 V5.5 ) . ------------------------------------------------------------------------------------------ Split from Sample program: S7-1200 with SINAMICS in Profinet. Attachment pn_write_parameters_en_A.zip (170 Downloads)
asjsadcohst Posts: 1 Rating: (0)	Last edited by: Min_Moderator at: 4/6/2016 1:45:44 PM New subject after splitting
Suggestion To thank Quote Answer

4/6/2016 1:59 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/7/2024 Posts: 22474 Rating: (3036)	Hello, what do you mean exactly with not started? From the Code is looks ok, have you set the correct values in the MW you use in the code? In the project only the GSD for the CU is installed, do you configure the CU in another project with Starter? Regards Christoph
	Last edited by: ChristophD at: 4/6/2016 2:02:06 PM
Suggestion To thank Quote Answer