Startup IOT2050 Basics

Hello,

I'm trying to boot an IOT2050 Basic and I'm having trouble.

I have burned 'IOT2050_Example_Image_V1.1.1.img' on a MicroSD and after a few seconds of starting the IOT2050 the 'STAT' LED turns red constantly.

I have tried burning 'IOT2050_Example_Image_V1.0.2.img' into the MicroSD and after starting the 'STAT' Led remains constant green.

In both cases I place a monitor in the Displayport and nothing comes out, I try to ping 192.168.200.1 nothing happens, I try to put an ethernet cable with a DHCP server in P2 and P1 and it doesn't make any request to require an IP, but I have the ethernet ports flashing. I put the TTY converter and with the PUTTY well configured I get nothing.

What should I do to start an IOT2050 Basic? What am I doing wrong?

Thank you,

Your question has made me look for the solution in another way, for IOT2050 Basic with FS:2 the example image is V1.2.2, it is indicated here: https://support.industry.siemens.com/cs/de/en/view/109741799

I already have it with the 'STAT' LED flashing green.

Thanks you very much.