Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Step 7 and TIA V12

Created by: Karls1 at: 3/7/2013 6:51 AM (3 Replies)

Rating (0)

Thanks 4

4 Entries

3/7/2013 6:51 AM	Rate (0)
Karls1 Posts: 139 Rating: (5)	Hello All, Can i install Step 7 and TIA V12 (trial) on Same PC together? Asking Expert's suggestion before hand TIA V12 . Thanks!
Karls1 Posts: 139 Rating: (5)
Suggestion To thank Quote Answer

3/7/2013 6:57 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 1/17/2025 Posts: 22497 Rating: (3044)	Hello, yes you can. Regards Christoph

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Karls1

3/7/2013 7:05 AM	Rate (0)
umencho Diamond Member Joined: 3/21/2006 Last visit: 1/14/2025 Posts: 10239 Rating: (1182)	Compatibility with other SIMATIC products STEP 7 Professional / Basic V12 work together with WinCC V12 and Startdrive V12 (Installation rules: STEP 7 V12 has to be installed before Startdrive V12) in a framework. STEP 7 Professional / Basic V12 (incl. WinCC Basic V12) can be installed on one computer in parallel with other versions of STEP 7 V11, V5.4 or V5.5, STEP 7 Micro/WIN, WinCC flexible (2008 and higher) and WinCC (V7.0 SP2 and higher). The following virus scanning software have been tested withSTEP 7 V12: - Trend Micro Officescan 10.6 - McAffee Virusscan Enterprise 8.8 - Symantec Endpoint Protection Manager 12.1

Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users ntan Karls1 iNano

8/6/2015 10:15 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by mdjacobs is split to a separate thread with the subject How do you configure Symantec to allow you to find accessible devices?. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on