Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

step 7 microwin and wincc flexible to Tia et winCC V13

Created by: 2 forums at: 3/28/2015 1:53 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/28/2015 1:53 AM	Rate (0)
2 forums Posts: 6 Rating: (0)	hi all , i use a s7-200 for my projct i would like to know if i can use the TIA portal V13 to connect with te automat i have STEP 7 - micro/Win but but it's better to use TIA portal than microWin Thank you all for help
2 forums Posts: 6 Rating: (0)
Suggestion To thank

3/28/2015 7:49 AM	Rate (0)
William_B Posts: 5225 Rating: (1182)	Question asked and answered at [LINK].
William_B Posts: 5225 Rating: (1182)
Suggestion To thank

3/30/2015 10:13 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4782 Rating: (123)	Closed cause question posted twice. The second thread with the subject S7-200 with TIA V13 is published within the conference SIMATIC WinCC (TIA Portal). Best regards Min_Moderator

Suggestion To thank

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Communication

Follow us on