Navigation

STEP 7 V5.4? or V.5.5

Created by: GabrielZ at: 12/19/2013 4:52 PM (3 Replies)

Rating (1)

Thanks 0

4 Entries

12/19/2013 4:52 PM	Rate (0)
GabrielZ Posts: 4 Rating: (0)	Hi everyone , I have a CPU 6ES7315-2EH14-0AB0 , it is possible programming with STEP 7 V5.4? Thank you
GabrielZ Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

12/19/2013 5:16 PM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 10/8/2024 Posts: 4620 Rating: (708)	Hi GabrielZ, depends on the firmware version you have on the CPU. which is it? Read THISlink
	Last edited by: Ste39 at: 12/19/2013 5:21 PM
Suggestion To thank Quote Answer

12/19/2013 5:56 PM	Rate (0)
GabrielZ Posts: 4 Rating: (0)	The version is V3.2.10 Regards Gabriel
GabrielZ Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

12/19/2013 6:01 PM

Rate (1)

Ste39

Platinum Member

Joined: 1/21/2013

Last visit: 10/8/2024

Posts: 4620

Rating:

(708)

Hello GabrielZ

Update V3.2.10 (6ES7315-2EH14-0AB0)
The above CPU version contains no new functions.
Information on STEP7 dependencies and upward compatibility:
To be able to run this CPU your require STEP7 V5.5 or higher.
For the CBA configuration you require iMap V3.0 +SP1 or higher. Configurations with earlier STEP7 and iMap versions arecompatible with later releases.

Last edited by: Ste39 at: 12/19/2013 6:02 PM

Share this page:

Share this page on...

Created by: GabrielZ at: 12/19/2013 4:52 PM (3 Replies)

Rating (1) Thanks 0

4 Entries

Last edited by: Ste39 at: 12/19/2013 5:21 PM

Last edited by: Ste39 at: 12/19/2013 6:02 PM

4 Entries

All about Product Information

Follow us on

Rating (1)

Thanks 0