Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Step7 pro TIA V12 and Step7 V5.4 on the same computer

Created by: banconi at: 11/2/2013 3:23 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/2/2013 3:23 PM	Rate (0)
banconi Silver Member Joined: 3/19/2010 Last visit: 10/26/2024 Posts: 438 Rating: (12)	Are there any limitations to have both software platforms from the subject installed on the same PC? I use Step7 V5.4 with CFC for my regular work, and now I need TIA for S7-1500. Best regards

Suggestion To thank Quote Answer

11/4/2013 10:15 AM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 1/17/2025 Posts: 4394 Rating: (1463)	Hi, the official information talk about TIA and STEP7 V5.5. That doesn't means that it will not work, just that it was not officially tested, and so, there is no garanties / support if doesn't work.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

11/4/2013 10:22 AM	Rate (0)
Nelliyan randy Posts: 461 Rating: (29)	Hi banconi I am using tia & simatic v5.5 in same pc win 7,, havent felt any problem stil now.... Regards, Nelliyan.G
Nelliyan randy Posts: 461 Rating: (29)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on