Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Step7 V5.3 and 6GK7-343-1CX10-0XE0

Created by: JeffryWithagen at: 4/11/2008 9:27 AM (5 Replies)

Rating (0)

Thanks 0

6 Entries

4/11/2008 9:27 AM	Rate (0)
JeffryWithagen Posts: 23 Rating: (0)	Hi All, Is the CP343 Lean -1 with the number 6GK7-343-1CX10-0XE0 supported in Step7? Cause I am (and HW update) not able to find a HW update for it. Thanks for your time, Jeffry Withagen
JeffryWithagen Posts: 23 Rating: (0)
Suggestion To thank Quote Answer

4/11/2008 10:08 AM	Rate (0)
Ton Verra Gold Member Joined: 4/20/2007 Last visit: 12/5/2024 Posts: 728 Rating: (43)	I'm using the one for 1CX00, seems to work! Don't know why the V2.0 isn't in the catalogue...

Suggestion To thank Quote Answer

4/11/2008 10:14 AM	Rate (0)
JeffryWithagen Posts: 23 Rating: (0)	Thanks for your replay I haven't tried that yet. When I read the PLC out in HW config it shows a cp343 lean, but not the right one and as a mistake. I haven't tried to shoot de CX00 to the plc..I will try that monday Thanks for your answer!
JeffryWithagen Posts: 23 Rating: (0)
Suggestion To thank Quote Answer

4/11/2008 10:42 AM	Rate (0)
INS Gold Member Joined: 4/6/2006 Last visit: 2/5/2024 Posts: 604 Rating: (56)	Hello Jeffry, For the CP343-1 Lean with MLFB: 6GK7343-1CX10-0XE0 you need to have at least Step 7 v5.4 SP2 to use all the features the modules has. Especially think about the PN IO Device option and the Web Page which is availble with v2.0. When you use a older version you are only capable of using the features of this older CP343-1 Lean.
	Best regards, INS
Suggestion To thank Quote Answer

4/11/2008 12:41 PM	Rate (0)
aikona Posts: 487 Rating: (36)	Hi To 'see' your new module in S7-V5.3 you need to download the latest hardwareupdates and install them .Be carefull because a new module may be in the hardware list but because of new unknown functionalities you may not be able to use it . In the HWconfig ( from S7-manager) there is a menu where you can download new HWupdate Menu Options/Install HW updates Eric
aikona Posts: 487 Rating: (36)
Suggestion To thank Quote Answer

4/11/2008 3:59 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello, I am sorry but INS is right, you can not use V5.3 if STEP7, you need at least V 5.4 SP 2 with HSP. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)	Last edited by: J_Bell at: 4/11/2008 3:59 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on