Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

STEP7 V5.5 with HSP191

Created by: nornor at: 12/22/2011 1:40 PM (14 Replies)

Rating (2)

Thanks 3

Result pages:: |; 1 | 2; |

15 Entries

Entries per page: 10 | all

6/5/2012 1:03 PM	Rate (0)
Ammy Platinum Member Joined: 4/19/2008 Last visit: 9/13/2023 Posts: 1525 Rating: (159)	smartauto It worked! How to make it get working ? Can you explain in more detail what you want to say ????????????????
	Ammy New for every one.............. “No duty is more urgent than that of returning thanks.” If Problem Solved......! I can't help you privately - please post in the Forums
Suggestion To thank Quote Answer

6/6/2012 4:46 AM	Rate (0)
smartauto Regular Member Joined: 5/19/2007 Last visit: 9/24/2023 Posts: 14 Rating: (0)	nornor Finally worked!! Thanks a lot. How tomake it worked?

Suggestion To thank Quote Answer

6/7/2012 1:10 PM	Rate (0)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 12/15/2022 Posts: 5697 Rating: (708)	hello, Seen the Stars and Thank you, this way. Just try. UMENCHO Did you try it without to use Wizard there? To open hardware configuration and to chakc manually in catalog. It should be there. Best regards, Hristo Mihalev Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

6/8/2012 4:12 AM	Rate (0)
smartauto Regular Member Joined: 5/19/2007 Last visit: 9/24/2023 Posts: 14 Rating: (0)	1. start Simatic Manager(V5.5SP2) 2. cancel the wizard 3. create a new project, add a 300 station 4. in HW configration, I can not find V3.3.6,ONLY V3.3 in the catalog:SIMATIC 300->CPU-300->CPU 314C-2PN/DP->6ES7314-6EH04-0AB0 thanks for Marcjan's reply.

Suggestion To thank Quote Answer

6/8/2012 8:19 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 7/12/2023 Posts: 10221 Rating: (1177)	3.3 is enough. This is the same like yours for Step7. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on