Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

STL to SCL

Created by: iman12 at: 10/20/2014 1:09 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

10/20/2014 1:09 PM	Rate (0)
iman12 Member Joined: 5/26/2012 Last visit: 8/4/2021 Posts: 16 Rating: (0)	Hellow Guys, I have a compiled logic in STL which has written with SCL language before compiling process. Now, I want to understand the logic but in STL is rather impossible. Can I change it to the SCL language? If yes can you explain the procedure? Thanks

Suggestion To thank Quote Answer

10/20/2014 1:15 PM	Rate (0)
TIBI68 Gold Member Joined: 12/1/2009 Last visit: 3/19/2023 Posts: 669 Rating: (146)	Dear iman12, as per my knowledgeit is not possible without having the SCL source butmaybe I am wrong. In that caseI want that software tool or procedure as well Best Regards.
	Give us your feedback and show us your respect! We take our free time to support you with our knowledge and experience. If this post is helpfull to you kindly click on "Rate" or "Thank".
Suggestion To thank Quote Answer

10/20/2014 1:25 PM	Rate (0)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 2/21/2023 Posts: 6794 Rating: (1341)	iman12 Hellow Guys, I have a compiled logic in STL which has written with SCL language before compiling process. Now, I want to understand the logic but in STL is rather impossible. Can I change it to the SCL language? If yes can you explain the procedure? Thanks Hello, There is no automatic tool for such a conversion.It is possible for small blocks if you know STL very good but it depends on the case.I suggest reading the following link that contains more helpful hints from smiffy plus a deleted link to a video file: SCL reverse compiler I hope that helps, Hamid Hosseini
	Last edited by: hdhosseini at: 10/20/2014 1:41 PM Demo Channel on Youtube
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on