Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Storing DB's data in table and read it sequentially?

Created by: ahsan1820 at: 11/7/2011 12:07 PM (1 Replies)

Rating (1)

Thanks 0

2 Entries

11/7/2011 12:07 PM	Rate (0)
ahsan1820 Posts: 119 Rating: (1)	I have to create a table in simatic s7 software ,which takes input from different memory words of shared DB and stores the data of DB in sequential order and also gives out the data sequentially in the same order.how can it possible
ahsan1820 Posts: 119 Rating: (1)
Suggestion To thank Quote Answer

11/8/2011 11:34 AM	Rate (1)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 9/9/2024 Posts: 6849 Rating: (1365)	ahsan1820 I have to create a table in simatic s7 software ,which takes input from different memory words of shared DB and stores the data of DB in sequential order and also gives out the data sequentially in the same order.how can it possible Dear ahsan1820, You can start implementing your own application using "indirect addressing" in STL.You can get information on indirect addressing from STEP7 online manual .Also check following link for some helpful tips: Indirect Addressing Best regards, Hamid Hosseini
	Demo Channel on Youtube
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on