Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Structure Tags + Alarm Logging

Created by: Evandro at: 3/12/2007 2:41 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

3/12/2007 2:41 PM	Rate (0)
Evandro Posts: 6 Rating: (0)	Hello! I am elaborating an application with WinCC, using the Structures Tag, to elaborate a structure of motors. In this structure I have one Word of alarms,so that each bit of this Wordwill set an Alarm that will be equal for all the motos of my application. My question is: Do Iget the alarm messageslinked to these structures in a practical way on the pictures windows, Where Do I use the TagPrefix? Evandro Piucco
Evandro Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

3/14/2007 12:20 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi I tried to find some FAQ which might answer your questions... http://support.automation.siemens.com/WW/view/en/23690358 http://support.automation.siemens.com/WW/view/en/24193022 http://support.automation.siemens.com/WW/view/en/23130772 But perhaps I just didn´t really understand your problem...? nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on