Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

struggling with ghost image of hard disk in our 840C system

Created by: Controls_Engineer at: 8/8/2011 5:25 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

8/8/2011 5:25 PM	Rate (0)
Controls_Engineer Posts: 60 Rating: (1)	--------------------------------------------------------------------------------------------------------------------------------------------Dear, I do not have information on courses Sinumerik 840C, if you want to send me grateful. Again today we take a model board 6FC51100DB020AA2 MMC 2Gb HD and Windows v3.11. We made an image with the Ghost v11 and we loaded on the HD Ghost v5, and then in the future make the copy image via the parallel port as a CNC v5 Ghost Master PC and laptop as a slave. Then we put the MMC board in the machine and turned it on without any problems and we needed to load TEA2.--------------------------------------------------------------------------------------------------------------------------------------------Dear All,I am also struggling a lot to do a ghost image of hard disk in our 840C system. I am not able to understand the above information posted by Pipo63. If any one expert in this process kindly make step-by-step procedure from the above info and post it here.Thanking you in advance,Venki - Controls
Controls_Engineer Posts: 60 Rating: (1)	Last edited by: CS Moderator at: 8/9/2011 10:58 AM new subject after splitting
Suggestion To thank Quote Answer

8/8/2011 5:47 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (476)	Hello.... I would prefer doing it with FX.... Check this link.... /tf/WW/en/Posts/53131 Regards, Prakash
Ekalavya Posts: 2964 Rating: (476)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on