Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Supervision with 2 posts of work

Created by: ee09140 at: 12/6/2007 1:21 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/6/2007 1:21 PM	Rate (0)
ee09140 Posts: 9 Rating: (0)	hello to all, Was prepared a supervision in winCC 6.2 for a post of work like servant, and at this moment it was asked in order that instead of a post of work was 2 posts and to work in redundancy. I would like knowing which modifications I will have to do in the supervision that was prepared for the only post of work and to know to differences between having one and two posts of work to work en redundancy. I thank your help ee09140
ee09140 Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

12/6/2007 2:33 PM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, Can´t exactly understand what you mean. Informations to WinCC redundancy can be found witj the following links: https://www.automation.siemens.com/hmi/html_76/products/software/wincc_optionen/redundancy.htm http://support.automation.siemens.com/WW/view/en/25842925
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

12/7/2007 11:20 AM	Rate (0)
Danielle Posts: 1275 Rating: (123)	Hi, If you have a single server, and wish to have a redundant pair instead, you'll need to do the necessary engineering, and get the other server's licences (which will be the same ones the first server has) plus one redundancy licence. Best regards, Danielle
Danielle Posts: 1275 Rating: (123)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on