Supported IO_URGENT!!

Hello,

Dose S7 1200 CPU 1214C DC/DC/DC ( 6ES7 214-1AG40-0XB0 ) V4.2 Support IO Profinet ( 6ES7 151-3BA23-0AB0 ) V6.1?  I mean can I connect them to each other? because I got error I diagnosis error message (( Not Reachable )) So why the LED SF always On in the Module PM (6ES7 138-4CA01-0AA0) ?despite all the modules were new.

Thanks

Hassan

H.SAPER

Dose S7 1200 CPU 1214C DC/DC/DC ( 6ES7 214-1AG40-0XB0 ) V4.2 Support IO Profinet ( 6ES7 151-3BA23-0AB0 ) V6.1?  I mean can I connect them to each other? because I got error I diagnosis error message (( Not Reachable )) So why the LED SF always On in the Module PM (6ES7 138-4CA01-0AA0) ?despite all the modules were new.

 If you can insert it to the HW config, and can connect them, that is not the problem.

The problem lies either in the connection cable or Profinet name.

Thank you Hati, it's clear.

again thank you for attention 

Regards.

Hassan