Switch off global screen for some screens

Hello!

Is it possible to set the global screen to not appear in some screens? I'm working with TIA Portal 13, WinCC Professional V13 SP1 u7. 

Regards

 KonMir

Yes, but i want to swtich off GLOBAL SCREEN i few screens.

I have got global screen with 'Alarm Window' and it appear when an error occurs. In few screen I don't need this 'Alarm Window' becouse I will use 'Alarm View' (with appropriate filters) from templete.

Hello KonMir,

I understand what you want to do, but I don't think you can switch the global screen on/off for different screens.  :/

Maybe you can use the system function "ShowAlarmWindow"
(name of the alarm window in the global screen, Off)
in an event
("Activate" of the other message window that should be visible? "Loaded" of the Screen itself?) ?

This way it would open the global screen but then hide the alarm windows you don't need.

Thanks for respons H.J.

Do you know it is possible to make my own alarm indicator witch will appear or flash when error occur? In error I mean all kinds of errors, warning (the same function as 'Alarm Indicator' from global screen).

KonMir

Thanks for respons H.J.

Do you know it is possible to make my own alarm indicator witch will appear or flash when error occur? In error I mean all kinds of errors, warning (the same function as 'Alarm Indicator' from global screen).

The best place for such an indicator would probably be inside a template page / template pages.

The trouble is that whatever you have in the template is set to the lowest layer. That means that no other object should be placed over it.

Let us assume you reserve the top right corner for such a function - alarm indicator in a button. The button can be hidden if the alarm is not to be active. When the alarm is active, the button is shown and the animation of the button makes it flash.

The pages where this button should not be able to appear uses a secondary template which does not contain this special indicator-button.

Clear? Helpful?
w

William_B

KonMir

Thanks for respons H.J.

Do you know it is possible to make my own alarm indicator witch will appear or flash when error occur? In error I mean all kinds of errors, warning (the same function as 'Alarm Indicator' from global screen).

The best place for such an indicator would probably be inside a template page / template pages.

The trouble is that whatever you have in the template is set to the lowest layer. That means that no other object should be placed over it.

Let us assume you reserve the top right corner for such a function - alarm indicator in a button. The button can be hidden if the alarm is not to be active. When the alarm is active, the button is shown and the animation of the button makes it flash.

The pages where this button should not be able to appear uses a secondary template which does not contain this special indicator-button.

Clear? Helpful?
w

 Yes, Wiliam_B it is very helpful. 

Best regards!

H.J.

Hello KonMir,

I understand what you want to do, but I don't think you can switch the global screen on/off for different screens.  :/

Maybe you can use the system function "ShowAlarmWindow"
(name of the alarm window in the global screen, Off)
in an event
("Activate" of the other message window that should be visible? "Loaded" of the Screen itself?) ?

This way it would open the global screen but then hide the alarm windows you don't need.

 I found in properties of Alarm Window: Mode/Dispal automatically and I switched it off. Also I use Alarm Indicator. And now when I click on flashing Alarm Indicator the alarm window is visible.

Regards